Torque motorThe utility is very wide, in the winding operation can be applied to metal materials, fibers, paper, plastics, rubber, etc., this process is usually a process in the tail of the production, can be said to be very important. In this process, it is necessary to maintain the tightening of the winding product and maintain a uniform tension, just so that this requirement can be met.

       More constant tension wire speed transmission in the winding process, thenP=F.V=Constant, i.e.M.n=A constant.P=Power,F=The tension,V=Line speed,M=Moment of force,N=Speed. Corresponding to mechanical characteristics requirements,M.nIt should be a hyperbola. Let's look at the figure below, which is a typical torque motor torque-The speed characteristic matches the winding tension curve.

         The shadow section between the two curves has ideal winding characteristics.

       1/3n0to2/3n0Range (roll to diameter ratio1:2When the relative power is approximately constant, and the tension is proportional to the power, so in the case that the tension control is required, this property indicates that the tension will be kept constant in this range. Corresponds to the roll diameter ratio1:3or1:4Or even larger, to a certain extent can also achieve the requirements of control tension.

       When the equipment is not the production of a single variety and specifications of products, the material and specifications need to be replaced, then the required tension and speed will be different. In this case, we can simply use a voltage regulator to adjust the input voltage of the motor to achieve thisTorque motorThe increase or decrease of the output torque.

       In SUMMARY:Torque motorWhen used for winding, it has the following characteristics:

       1.From empty disc to full disc, the winding tension is kept steady

       2.The adjustment of tension is more convenient, and it can be used normally once it is adjusted

       3.The structure is relatively simple and reliable, and the maintenance and installation are also relatively convenient

       4.The control line is simple, the operation is relatively simple

       Torque motor manufacturerMori machineFactory direct sales; If you just have this need, or want to know about the content, then welcome to leave a message online or call consultation0575-83781127. Mori is consistent.