YEJCheck common faults of brake motor:

       1.Check whether the brake motor power supply is normally connected, whether the rectifier connection is normal, and whether there is short circuit.

       2.Whether the relay capacity is appropriate, whether the interface is oxidized and rusted, resulting in poor contact and heat.

       3.If the motor is used for clearanceZIn excess of regulations, in excess of timely adjustment, adjustment methods refer to the gap adjustment section.

       4.If the external voltage is normal, check the power supply and adjust it to the normal voltage.

       5.The stator copper wire in the slot plate is in poor contact or broken. If this happens, contact for a replacement.

       6.When the braking effect is not good, the selected motor may not meet the needs of the equipment. Please select a larger electromagnetic brake motor specification.

       Solutions to excessive noise:

       1.Foreign bodies may be mixed together, because the motor is a single brake, the oil, water, sand and other foreign bodies are mixed together, seriously affecting the use of the brake. In complex environments, it is strongly recommended to use a dust shield.

       2.Bearings are improperly installed and brakes are not horizontally installed, resulting in uneven force during rotation. Remove and reinstall before purchase. Please select the appropriate mounting size before purchase.

       3.The stator, rotor and friction parts of the electromagnetic brake motor are improperly installed, and professionals try to reinstall them after disassembly.

       Mori machine,19Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.