NormalThree-phase asynchronous motorIt is possible to install a frequency converter, but the fan of the ordinary motor is installed on the motor shaft, so when the motor speed is low, the heat dissipation effect will become worse; According to the constant frequency and constant voltage design, it can not fully adapt to the requirements of frequency conversion speed regulation, butVariable frequency motorCan solve this problem very well.

       Variable frequency motorwithThree-phase asynchronous motorThe difference is that the cooling fan of the former is not fixed on the shaft of the motor, but is powered by the power frequency power supply alone, even if the motor is5HZIf the frequency is running, the cooling fan will still be50HZThe speed of operation;

       The latter cooling fan is fixed on the motor shaft, and the motor is synchronous rotation, that is, the speed is the same, here is the previous mentioned when the motor speed is low, it is often said that the low-frequency operation, the fan is also running at a low speed, the cooling capacity is greatly reduced, then the heat generated by the motor can not be distributed, and the motor will burn seriously.

       someVariable frequency motorInstead of using additional cooling fans, the motor surface cooling area is increased to solve these problems.

       The above content is composed ofThree-phase asynchronous motormanufacturerMori machineProvided. If you still want to know about this type of motor or are interested in learning about our products, please leave a message online or call us directly0575-8378-1127.