When the three-phase asynchronous motor is in normal operation, the fuselage should be smooth, and the sound should be low and even; When the motor produces vibration, we first distinguish whether it is caused by the motor itself, or caused by the poor installation of the transmission device, or it is transmitted by the mechanical load end, and then exclude it according to the specific situation.

Although the bearing in the motor is only a small part, but the torque motor, three-phase asynchronous motor and other product quality, the quality of the bearing is particularly important, Senli can according to customer requirements, the use of such as NSK,TPI and other bearing brands, better guarantee product quality, to meet customer needs. Below, together with Senli Motor Xiaobian to understand the importance of bearing.

Three-phase asynchronous motor is the production of the most widely used electrical equipment, its role is to convert electrical energy into mechanical energy, the electric energy consumed by the motor in the enterprise accounts for more than 60% of the energy consumption, its simple structure, easy to start, small size, reliable and durable work, easy to maintain and overhaul.

When the motor is running under load, we all hope to play its role as much as possible, and the larger the load, that is, the larger the output power, the better; But the higher the output power, the higher the loss power, the higher the temperature. Here is a simple understanding of the temperature rise of three-phase asynchronous motors with Senli Motor Xiaobian.

The installation site of the motor has a direct impact on the service life of the motor; For example, the brake motor, if the installation site is not appropriate, will significantly shorten the service life, will also become a major failure factor, so we can not be careless in this respect, the following and Senli motor Xiaobian together with a simple understanding of it.

The brake motor reduces the inertia and impact force of the motor during its instantaneous braking, which is generally used in scenes with positioning requirements. Common cranes are applied to this principle, which can avoid downward sliding when the motor is stopped. Here is a simple understanding with Senli Motor Xiaobian.

In order to ensure the normal operation of the motor and the stability of production, regular inspection and maintenance of the motor is an important link. For example, a torque motor, if there is a foreign body from the hood into its interior, then it is likely to reach the middle of the air gap of the product rotor, causing the product to sweep the chamber, wear down the winding insulation, so that it is damaged or scrapped.

The deformation of the parts of the motor product has a great relationship with the way of placement, such as the placement of the frame, the use of vertical rather than horizontal, can avoid the unsuitable diameter of its stop and bore. At the same time, the design of parts is also a very particular work, with light, beautiful, no deformation as the premise, but in the design link, the production link may cause deformation.

The motor as a transmission equipment directly docking with the mechanical product, the rotation direction becomes very important. In the three-phase asynchronous motor products, if the customer does not specify, then the motor after wiring rotates in the normal direction, we observe from the shaft extension, is rotated clockwise, so as to ensure the conformity of the equipment and product installation.

Machining is an important part of the production and manufacturing of motor products, the dimensional accuracy, matching accuracy and roughness between the parts are achieved by machining, so the level of machining quality will directly affect the quality of the three-phase asynchronous motor, and Senli Motor Xiaobian together with a simple understanding.