The deformation of the parts of the motor product has a great relationship with the way of placement, such as the placement of the frame, the use of vertical rather than horizontal, can avoid the unsuitable diameter of its stop and bore. At the same time, the design of parts is also a very particular work, with light, beautiful, no deformation as the premise, but in the design link, the production link may cause deformation.

       In the processing, the torque motor manufacturers for cast iron, the billet should have enough aging treatment to begin processing; Seiko processing fashion card parts and the force is not uniform, after loosening the clamping part, the frame is deformed due to rebound.

       Compared with other parts, the storage requirements of the frame are relatively more.Torque motor manufacturersIt is recommended that the frame be placed vertically, so that on the one hand, a certain number of layers can be stacked to save space, and the frame will not be deformed; On the contrary, if the horizontal placement is used, especially the multi-level stacking, the deformation of the frame will be particularly serious, mainly including the oval of the frame stop and the inner bore or the disalignment of each other.

       Mori machine,19Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.