YEJThere is an electromagnetic brake at the tail of the brake motor, which also pulls in when the motor is energized. At this time the motor will not brake, the motor will be pulled in when the power is off, and the motor will be stopped by the spring. The two lines connect the two AC inputs of a bridge, synchronized with the two random inputs of the motor380Volt AC, direct output terminates with the brake excitation coil.

       SelectYEJBrake motor precautions:

       (1Some systems, such as transmissions, lifting devices, etc., require the brake motor to stop as soon as possible. However, in the case of failure, emergency stop, power failure, there is no regenerative braking, the server cannot slow down the motor. At the same time, the mechanical inertia of the system is large, so it is necessary to choose dynamic braking, and the choice of dynamic braking depends on the load and the working speed of the motor.

       (2In some systems, in order to maintain the static position of the mechanism, the motor needs to provide a large output torque and stop for a long time. If a self-locking function such as a servo motor is used, the motor will overheat or overload the amplifier. In this case, it is necessary to choose a motor with an electromagnetic brake.

       (3)YEJThe brake motor server has a built-in regenerative braking unit, but regenerative braking may cause frequent brakingDCThe bus voltage is too high, and a regenerative brake resistor is needed. Whether the regenerative brake resistance needs to be equipped separately, and how many regenerative brake resistors should be equipped.

       Mori machine,19Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.