In the production work, if you want to extend the service life of the motor, the daily inspection and maintenance can not be sloppy, do a good job of daily maintenance work, a lot of failures can be avoided. Here is a simple understanding of the common faults of three-phase asynchronous motors with Senli Motor.

       The speed is slow, which is also encountered in the production market, and the high temperature is an important reason for the short circuit between turns of the winding, which will lead to a series of problems in the motor, so we need to often check the operation of the motor, pay attention to useThree-phase asynchronous motorWhether the occasion meets the specifications and meets the ventilation and heat dissipation conditions. Pay attention to check whether the cooling wind blade is intact and whether the rotation is normal. The temperature rise of the general motor housing should not exceed40℃.

       If the three-phase asynchronous motor is found to produce noise during operation, it is usually caused by debris in the stator and rotor clearance, excessive bearing wear and other reasons. The way to deal with it is to open the end covers at both ends, pull out the rotor, and remove debris. Check the use of bearings and replace bearings if necessary. If the motor rotor is not moving because the bearing is locked, the rotating current will be much greater than the normal working current, and it will not take long to burn the motor.

       aboveThree-phase asynchronous motor manufacturersFor some of the reasons for motor failure shared by everyone, if we do regular maintenance and maintenance during use, it will greatly increase the service life of the motor.

       Mori machine,19Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.