Want to solve the three-phase asynchronous motor and other motor products are not burned out in the production process, the more effective way is to use the frequency converter, and now the brand of frequency converter technology is more mature, the quality is guaranteed, and the price can not be too expensive, compared with the occurrence of accidents, or burned out the motor is still more cost-effective.

       generalThree-phase asynchronous motorThis kind of products, motor manufacturers will install protective devices, what short circuit, lack of phase, overcurrent protection, but many times often take care of this head, but do not take care of that head, but if the frequency converter is used then these problems are solved at once. However, when we use products such as three-phase asynchronous motors, we should pay attention to the following problems:

1.The parameters of the selected motor should be consistent with the required equipment, and attention should also be paid to checking the value of the motor nameplate.

2.Wiring is correct.

3.The cooling device should be in good condition, and the ambient temperature should meet the continuous working requirements of motor products such as three-phase asynchronous motors.

4.To prevent the motor from being damp, and the wear degree of the bearing should be controlled within the allowable range, but once the bearing is found to be seriously worn, it needs to be replaced.

5.When the motor is working, it is necessary to pay attention to some leakage protection measures such as grounding to prevent abnormal or high temperature conditions of the motor, and immediately stop for inspection if an anomaly is found.

       Three-phase asynchronous motor manufacturersSenli Motor,19Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.