Because the environment used by the three-phase asynchronous motor is different, like some outdoor use environment, the motor is easy to water, then whether the water motor can still be used? Senli Motor Xiaobian tells you here that the general motor will not be broken because of water, but the insulation will be greatly reduced.
Three-phase asynchronous motor and other motors, the maintenance work after water is similar, all need to be disassembled for drying; herewithThree-phase asynchronous motorFor example, if it is soaked fleshy, then there is the possibility of sediment inside, in the maintenance to take out the rotor, here should be careful not to touch the winding, so as not to cause secondary damage, the rotor will be washed out, with a multimeter to measure the ground insulation, interphase insulation and other values, can not be used for testing, because500Megohm's dial is output500The DC voltage is likely to break down the winding insulation of the incoming motor.
For the three-phase induction motor with water, we can use a variety of drying methods, such as hot fans, light bulbs, or sun drying, but the three-phase induction motor manufacturers still recommend the use of a dryer, the effect will be better, but the temperature is maintained at the time of use60℃Can be left or right, not too high; After making sure that it is completely dried, it can be used500The voltmeter measures the insulation between ground and phase, if the insulation between ground and phase is reached0.5Above megohm motor can be put into use, below0.5Megohm can't be put into use.
Shengzhou Senli Motor, yesThree-phase asynchronous motor manufacturersProvide diversified customization, specification customization, appearance customization, special shaft customization and color customization. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.
Long axis torque motor products, suitable for winding and winding scenarios, can be customized for different industry scenarios, to meet the requirements of use. This product produced by Senli has the characteristics of reasonable structure, high efficiency, good characteristics and long service life.
Shengzhou Senli Motor19Old motor manufacturers, with a number of their own motor production lines, from the shell, shaft, rotor, stator are independent production, all products are the use of professional product quality supervision and testing equipment full inspection factory, can provide testing reports. From the shaft machining to the whole machine assembly are completed independently. Truly realize factory direct sales.
Senli motor products are used180°High temperature resistance all copper coil material, torque motor products can be used with different rotors (ordinary rotors/Steel rotor), rotor of different motor characteristics are different, we from the shell, shaft, rotor, stator are produced by the independent, all products are the use of professional product quality supervision and testing equipment full inspection factory, can provide testing reports.