YSSeries three-phase asynchronous motors are generally used in mechanical equipment without special requirements, such as: agricultural machinery equipment, food machinery equipment, small machine tools, mixers, etc. It has the advantages of energy saving, high reliability, easy maintenance, large starting torque, etc. We previously introduced the precautions and methods of how to install the motor. Today, Senli Motor Xiaobian gives you a simple description of how to disassemble the motor.

       We are going onThree-phase induction motorWhen disassembling, pay attention to the placement of small parts, you can find a suitable small box, and put the accessories bolts into it to avoid loss.

       1.Remove the case: remove the fan cover with a screwdriver;

       2.Remove the fan: use a tool to remove the fan;

       3.Remove the rear end cover: Before removal, pay attention to mark the joint of the stator and the end cover with a marker, so as to avoid errors during installation; Then remove the oil cover bolts on the rear end cover. After all the bolts of the rear end cover are removed, tap around the end cover with a wooden hammer to remove it.

       4.Remove the rotor: After removing the front cover bolt, strike the rear rotating shaft with a wooden hammer, and remove the front end cover after it is detached. Here, pay attention to remove, do not touch the coil, easy to damage the motor;

       5.Remove the front end cover: remove the front end cover oil cover bolt with a wrench, and then hit the end cover with a wooden hammer to make it free from the bearing;

       6.Remove bearings: Remove the front and rear bearings with appropriate pull codes.

       The above content is from the three-phase asynchronous motor manufacturerMori machineProvided, if you are interested in our products, welcome to leave a message online or call directly:0575-8378-1127.