The motors used by winding equipment manufacturers are generally torque motors that can be controlled by constant tension, so you know how to wire, and what problems should we pay attention to when wiring? Then Senli Motor Xiaobian will take you to a simple understanding of the details.

       Torque motor wiring is a more important work in the installation, we must first understand the wiring circuit diagram before wiring, generally in the junction box or nameplate will be marked, we need to check the insulation before wiring, when the torque motor to meet the current specification requirements, should be connected to the external wiring.

       Torque motorCheck whether the front end of each winding in the end cap is loose before connecting the outer wire. After tightening the pressing screw of the internal outlet wire, the short circuit sheet can be connected according to the required wiring method, and then the external wire is pressed tightly.

       In the trial operation, we should pay attention to observe whether the rotation direction meets the requirements, in addition to the steering equipment that has strict requirements for the drag load, the torque motor wiring even if each stage is reversed, it will only cause the motor to reverse, but it will not damage the motor, when the AC torque motor is reversed, the two torque motors can be randomly exchanged. When the torque motor is reversed, the two armature voltage connections can be exchanged and the two excitation voltage connections can also be changed.

       Mori machine,20Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.