Torque motorThe control is to adjust the power supply and voltage according to different needs, in order to adapt to different load requirements, this is any voltage regulator can be applied, but the power of the voltage regulator needs to be selected according to the current demarcated by the motor nameplate, and this speed range is very important when we use the motor.

       When the motor is used as a winding characteristic, the selection of the output torque should be similar to the required torque, avoid selecting too large, too large output torque used on small load equipment, will make the input voltage of the motor drop very low. When the voltage is too low,Torque motorTorque of...-The speed curve is relatively flat, which makes the winding accuracy worse, that is, the load change is not coordinated with the speed change. Generally, the input voltage should not be lower than that200V.

       General controllers can be divided into different structures and wiring methods4The power line input is connected to the motor controller, and then the motor controller outputs, and then connects to the motor(As a motor input power supply)The wiring terminals. Motor controller only3A terminal, need to remove the motor star point and motor remove3Each point is connected separately; As a motor star point to adjust the coil voltage, the motor controller with analog interface is designed for frequency converter connection to collect signals; Make it complete closed-loop control, double potentiometer motor controller, two potentiometer control voltage is different,Torque motorThe automatic potentiometer conversion is more accurate when the voltage is raised or lowered.

       The above content is composed ofTorque motor manufacturerMori machineProvided, if you are interested in understanding our products, welcome to leave an online message or call directly:0575-8378-1127.