Senli·23 years motor manufacturing factoryProvider of low-power motor solutions below 3kW

CN| EN

+86 0575 83781127+86 17816180570

Three-phase torque asynchronous motor manufacturers
hot keywords:
Torque motor manufacturers
three-phase asynchronous motor
font: Big Middle Small

Torque motor manufacturers analyze the cause of motor shaft breakage

Released Date: Jun 03,2021 Article Source: Shengzhou Senli Motor
In the daily production process, there are many shaft fracture phenomena in the motor, which generally occurs at the shaft extension root and the bearing position of the shaft extension end. In dealing with the phenomenon of shaft breakage such as three-phase asynchronous motors and torque motors, it is necessary to check the shaft section for macroscopic observation and microscopic analysis to find out the causes in order to fundamentally solve the problem.

       In the daily production process, there are many shaft fracture phenomena in the motor, which generally occurs at the shaft extension root and the bearing position of the shaft extension end. In dealing withTorque motorWhen such a product breaks the shaft, it is necessary to check the shaft section for macroscopic observation and microscopic analysis to find out the cause, so as to fundamentally solve the problem.

       Motor shaft breakage is the result of multiple factors superimposed, hereMori machineSmall series on a few common reasons:

       Shaft breakage we first consider manufacturing potential quality problems. Such as the shoulder transition without process control requirements, no heat treatment after welding, surfacing layer inclusions super, resulting in shoulder rounded stress concentration, fatigue cracking under the action of rotating bending torque, these fundamental reasons are defects in the production and processing of the motor shaft, so that the motor shaft fracture.Mori machineThe image producedTorque motorSuch as all products are fully inspected factory, in order to avoid such accidents.

Torque motor manufacturers product picture

       Installation problem. If the belt pulley drive is used, the tension of the belt is too large or greater than the recommended value provided by the manufacturer, which increases the load of the motor shaft and is also the main factor in the occurrence of fracture; Like some motors installed with couplings, the coaxiality of the motor and the axis of the equipment is not guaranteed, which will lead to shaft fatigue and fracture.

       Excluding external factors such as installation, the plate shaft fracture will appear in the welding position of the plate, as irregular cracks, most of themMotor manufacturerIt is through the annealing process, at both ends of the plate and the spindle connection, to process the stress groove to solve such a broken shaft problem.

Torque motor manufacturers product picture

       So we're in production, eitherTorque motorOther motor products, we are in the production process due to good maintenance and maintenance work, like some shaft phenomenon, when the momentum of the surge to a certain extent, it will increase the current, at this time the electric temperature rise, the mechanical impact will increase, but also affect other equipment caused damage.

       Shengzhou Senli MotorMain production3kwThe following low-power motors, yesTorque motor manufacturers; You can learn about the product first, if you have any questions, please contact us. Contact number0575-8378-1127.

Recommend products

Long axis torque motor scenario application

Long axis torque motor scenario application

Long axis torque motor products, suitable for winding and winding scenarios, can be customized for different industry scenarios, to meet the requirements of use. This product produced by Senli has the characteristics of reasonable structure, high efficiency, good characteristics and long service life.

Winding torque motor manufacturers strength

Winding torque motor manufacturers strength

Shengzhou Senli Motor19Old motor manufacturers, with a number of their own motor production lines, from the shell, shaft, rotor, stator are independent production, all products are the use of professional product quality supervision and testing equipment full inspection factory, can provide testing reports. From the shaft machining to the whole machine assembly are completed independently. Truly realize factory direct sales.

Torque motor Motor product price details

Torque motor Motor product price details

Senli motor products are used180°High temperature resistance all copper coil material, torque motor products can be used with different rotors (ordinary rotors/Steel rotor), rotor of different motor characteristics are different, we from the shell, shaft, rotor, stator are produced by the independent, all products are the use of professional product quality supervision and testing equipment full inspection factory, can provide testing reports.

联系我们

  • Building 1, Kejin Industrial Park, Changle Town, Shengzhou City, Zhejiang Province
  • micmotor@chaoli.tech
  • +86 0575 83781127