generalVariable frequency motorIs driven by the squirrel cage typeThree-phase asynchronous motorDerived from, its additional load in10%-100%Continuous operation within the range of additional speed, the temperature rise will not exceed the allowable value of the calibration; It can also be driven by the inverter to achieve different speed and torque to adapt to the needs of load changes.
We are going onVariable frequency motorWhen the maintenance, we should pay attention to the good lubrication of the bearing during operation, when the bearing of the inverter motor is found to be overheating, or the grease is deteriorated, then the grease should be replaced in time, and the old grease should be cleaned up first when the replacement is carried out; The use of the environment is important, because the environment should be kept dry; If the motor thermal protection, short circuit protection continuous action, we must first find out the cause of the fault, whether because of overload or the protection device set value is too low, or the cause of the motor, after the solution can be put into operation.
When replacing the winding, pay attention to record the original winding data, and do not arbitrarily change the original design data, which will lead toVariable frequency motorDeterioration of the performance of the system, which can lead to unavailability in severe cases; When a large number of motors are purchased, special attention should be paid to storage, the storage environment should be kept dry, to avoid the rapid deterioration of the ambient temperature, and it should not be piled up too high, so as not to damage the lower packaging of the motor, resulting in motor damage.
Shengzhou Senli Motor,Inverter motor manufacturers,3KWAnd the following small power motor manufacturers, support can be providedOEM/ODMCustomization, specification customization, appearance customization, special shaft customization and color customization. We provide our customers with fast proofing service, complete quality inspection report and technical after-sales service.
Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.
Long axis torque motor products, suitable for winding and winding scenarios, can be customized for different industry scenarios, to meet the requirements of use. This product produced by Senli has the characteristics of reasonable structure, high efficiency, good characteristics and long service life.
Shengzhou Senli Motor19Old motor manufacturers, with a number of their own motor production lines, from the shell, shaft, rotor, stator are independent production, all products are the use of professional product quality supervision and testing equipment full inspection factory, can provide testing reports. From the shaft machining to the whole machine assembly are completed independently. Truly realize factory direct sales.
Senli motor products are used180°High temperature resistance all copper coil material, torque motor products can be used with different rotors (ordinary rotors/Steel rotor), rotor of different motor characteristics are different, we from the shell, shaft, rotor, stator are produced by the independent, all products are the use of professional product quality supervision and testing equipment full inspection factory, can provide testing reports.