Before wiring the brake motor, check whether the control circuit and protection circuit are normal, whether the fuse selection is appropriate, and whether the connection contact between the control appliances is secure. The following is a simple understanding with Senli Motor Xiaobian, about the trial operation of the brake motor installation.

       In normal times, connect the motor power supply to start no-load, and investigate whether the motor running direction meets the equipment requirements. If the rolling direction is opposite, just switch any two power lines into the motor terminal board. After the start experiment is normal, the motor is connected to the load for trial operation, and the part-time current is checked whether it is normal.

       If the current is too large, it should be stopped for inspection. With the load on,Brake motorDo not turn or the speed is very low, or there is an abnormal hum, should be off the power, such as the power time is a little longer, it is possible to destroy the motor winding, and even damage the control circuit and damage the equipment, ordinary this kind of state, the machine is overloaded or stuck, the electrical reason for phase break operation. At this time, the fault should be carefully checked, and the new trial operation can be completed after the fault is broken.

       Senli Motor,19Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , orOnline consultation message, we will have a business person to contact you, you can also contact us directly0575-8378-1127.