Bearing inspection and maintenance. The bearing is an important part of the brake motor, and we should clean and replace the grease or lubricating oil after a period of use. The time of cleaning and oil change should be worked with the working condition of the motor Environment, degree of cleanliness, lubricant type depends, half per job3-6Once a month, it should be cleaned and re-greased. When the oil temperature is high, or the environmental conditions are poor, dust More motors should be cleaned and oil changed frequently.
Inspection of insulation. The insulating capacity of the insulating material varies depending on the degree of dryness, so checkBrake motorThe drying of windings is very important. The working environment of the motor is wet, As a There are corrosive gases and other factors, will destroy the electrical insulation. The most common is the winding grounding fault, that is, the insulation damage, so that the live part and the housing and other metal that should not be charged Part of the collision, the occurrence of this failure, not only affect the normal operation of the motor, but also endanger personal safety.
Therefore, the motor in use, should often check the insulation resistance, but also note I want to check whether the grounding of the motor housing is reliable.
The brake motor should be overhauled after one year of operation. The purpose of the overhaul is to carry out a thorough and comprehensive inspection of the motor, Maintenance, supplement the motor missing, worn components, completely eliminate the dust and dirt inside and outside the motor, check the insulation, clean the bearing and check its wear. Discovery question Problem, timely processing. Generally speaking, as long as the use is correct, properly maintained, and the fault is found and handled in time, the working life of the brake motor is very long.
Shengzhou Senli Motor isBrake motor manufacturers, available if necessary1688Search "Shengzhou Chaoli Electric Appliance Factory", or contact us directly0575-8378-1127.