Brake motorIt can brake the motor under the action of the spring, so we also call itBrake motor. So todayMori machineXiaobian will take you to understand this motor.

       Brake motorThe adjustment method of brake gap is that there is a spring on the clutch handle of the motor, tighten the outside screw, if this is still not possible, there is a brake pad distance adjustment screw under the spring, loosen the fixed screw inside first, and then tighten the long screw outside.

       Brake motorThe working principle is as follows:

       1There is an electromagnetic brake at the tail of the motor, when the motor is powered on, it is also powered on, then it does not brake the motor, when the motor is powered off, it is also powered off, the brake brakes the motor under the action of the spring;

       2The two lines are the two AC input ends of a rectifier full bridge and connected to any two line ends of the motor and the motor synchronous input380Volt AC, two DC outputs are connected to the brake excitation coil;

       3This is how it worksBrake motorWhen the coil is energized, the direct current generated by the suction will separate the two friction surfaces at the tail, and the motor will rotate freely, and the motor will brake through the spring recovery force. Depending on the motor power, the coil resistance is between tens to hundreds of euros.

       Mori machine,19Focus on motor development and production, yesBrake motor manufacturers, complete product models. Insulation levels can be customized according to customer requirements (ELv.,BLv.,HLv.,FLv.). Aluminum shell body corrosion resistance, light weight, long service life. The shell, shaft, rotor and stator are produced independently, refusing middlemen and ensuring quality from the source. Can provide customized solutions for customers, contact number:0575-8378-1127.