The lead wire of the motor is a part to facilitate the connection between the winding of the three-phase asynchronous motor and the power supply, that is, it is first connected with the winding of the motor, and then it is led to the outside of the motor housing through different paths, and if necessary, it is connected and fixed through the patch board to realize the convenience and safety of the connection between the motor and the power supply.

       For some small sizeThree-phase asynchronous motorIf the electromagnetic line used is relatively thin and soft, as long as the insulation problem of the path through is ensured, the direct connection method is OK, but when the electromagnetic line is thin, the direct leading process may appear the fact that the electromagnetic line is broken.

       The winding is within the housing of the motor, and the connection of the power supply is more convenient outside the housing of the motor, whether the transition needs to be made by connecting the flexible wire depends on the situation of the winding itself, as well as the distance and smoothness of the path through.

       But for most of themThree-phase asynchronous motorThe stator winding, whether the soft winding of enameled wire or the winding of formed coil, is directly drawn out, from the aspects of technology and safety there is a certain difficulty, so it is more suitable to complete the connection from inside to outside by means of lead wire.

       Three-phase asynchronous motor manufacturersReminder: The motor wiring should match the insulation grade and rated voltage of the motor winding, and ensure the reliability of the connection between the wiring and the winding body, as well as the connection between the wiring and the external end, which is also the key point of quality control of any motor enterprise.

       Available if needed1688Search "Shengzhou Chaoli Electric Appliance Factory", or contact us directly0575-8378-1127.