We talked about that last timeThree-phase asynchronous motorThe preparation work before disassembly, because of recording the characteristic position of the motor before disassembly, can not blindly start, today, Senli Motor Xiaobian for everyone to share the steps of motor disassembly.

       Three-phase asynchronous motor manufacturersIt is said that when disassembling the motor pulley or coupling, it is necessary to make a size mark on the shaft extension end, because special tools are used-Puller, pull it out slowly; The removal steps are as follows:

       1.Remove pulley or coupling

       2.Remove the fan tail hood

       3.Remove the positioning key or screw, and remove the fan

       4.Unscrew the front and rear end caps and remove the front bearing outer caps

       5.A wooden board is used to pad the front end of the rotating shaft of the three-phase asynchronous motor, and the rotor together with the rear end cover is knocked out from the stop mouth with a hammer

       6.Extraction rotor

       7.Insert the wooden square into the stator core, hold the front end cover, and then use a hammer to hit the wooden square, remove the front end cover, and then remove the front and rear bearings and bearing inner cover

       For the disassembly of the pulley or coupling, if it cannot be pulled out, you can use kerosene to operate, pour kerosene into the joint of the inner hole and the rotating shaft, which can loosen the rusty part, or use a blowtorch to heat the outside, and use asbestos or wet cloth to wrap the shaft.Three-phase asynchronous motor manufacturersReminder: The temperature should not be too high when heating, and the time should not be too long.

       The above content is composed ofShengzhou Senli MotorProvided. We produce three-phase asynchronous motor products, model parameters are complete, support a variety of ways to install, can be customized according to customer use scenarios, budget needs and so on. Customize the process: Understand the requirements-Provide parameters and drawings-Design scheme-Confirmation scheme-Confirm cooperation-Mass production-Deliver the goods-After-sales service; Can provideOEM/ODMCustomization, specification customization, appearance customization, special shaft customization and color customization.

       Available if needed1688Search "Shengzhou Chaoli Electric Appliance Factory", or contact us directly0575-8378-1127.