Right againstThree-phase asynchronous motorDuring assembly, if rust is found in the parts, we should remove the rust and then assemble them. So how to treat the rusty place, what kind of method can be more quickly and effectively? belowMori machineXiaobian introduces the rust removal method of the motor:

       We can use some simple tools, if the rust layer is relatively shallow, you can use emery cloth to polish, here should be based on the roughness of the surface of the polished part to choose to avoid damageThree-phase asynchronous motorThe precision of... It is suggested that when grinding, the direction of grinding should be consistent with the turning direction of the original processing as far as possible; If it is a thick rust layer, it can be cleaned with a scraper, a file knife, a grinding wheel and other tools according to the situation. If it is more serious, use the special shot blasting machine of the foundry for treatment.

       You can also use liquid "rust remover" smear, under the action of chemical rust removal, the advantage of this method is that it has less impact on the dimensional accuracy of the rust being treated, but also more labor-saving, only suitable for shallow rust layer; It will lose the original gold luster after processing due to chemical reaction

       The above content is composed ofThree-phase asynchronous motor manufacturersMori machineProvided. If you are interested in our products, please leave a message online or call us directly0575-8378-1127.