Many scenarios are used in production operationsTorque motorBecause of its good constant torque characteristics, speed can be adjusted. Shengzhou Senli Motor to develop a complete quality control process, each batch of products are product quality supervision and testing system analysis, can provide factory testing report.

       Three-phase torque motorThe structure is different from that of ordinary three-phase asynchronous motors. The rotor guide bar and end ring materials used in the former use brass materials with high resistivity, so that it can allow long-term low-speed operation or even blocked rotation; The open-type structure is also used, and the rotor is ventilated by an axial hole to avoid burning due to serious heating.

       General situation in the selectionThree-phase torque motorWhen applied, the following conditions should be met:

       1.Output torqueMWith load torqueMzShould be close. namelyM=(0.2~0. 8)Mzmax,MzmaxIs the peak load torque.

       2.The speed range should be consistent with the load speed. Immediate operating speedn=(0.3~0.7)n1,n1Indicates synchronous speed.

       Mori machineProduction of motors to meet customer needs. Is a family with19Years of R&D and production experienceTorque motor manufacturersThe production of this product meets the application of receiving and unwinding production; adopt180°Grade high temperature resistance all copper wire, durable; We can customize products according to needs, while also realizing short or long term (30Minutes) of the rotation time. Interested in our products welcome online message consultation or call directly:0575-8378-1127.