An old talking point:Torque motorHow to select. When used for winding operations, the tension and wire speed of the rolled product should be kept unchanged; It is used for braking during uncoiling operation, and it is also used as tension control. At this time, it is in reverse state. We can control the torque size through the pressure regulator to make it meet the demand.

       In productionTorque motorThe speed range selection is very important, we choose the output torque and the required torque is similar, avoid choosing too large, if too large output torque used in small load equipment, the input voltage of the motor will be very low; If the voltage is too low, the accuracy of the winding will be poor, that is, the load change and the speed change are not coordinated.

       In order to obtain good winding properties,Torque motorThe application range of speed, that is, the choice of higher speed when empty and lower speed when full, is very important. The reasonable working speed range of different pole motors and coil diameter ratios is shown in the following table.

       Mori machineisTorque motor manufacturerIf you are interested in learning about our products, you can leave a message online or call us directly:0575-8378-1127.