Torque motorBelongs to a more special form of motor, it can not be affected when the stop, unrestricted operation, that is, when the rotor is prevented from rotating, the motor No damage will be done. In this mode of operation, the motor will apply a steady torque to the load. When we do some pre-installation check work before use, we can read some carefullyTorque motormanufacturerThe instructions for use to carry out a relative understanding are below Mori machine Xiaobian briefly sorted out how to operate after receiving the motor:
(I).Check before installation
receiveElectric machineDo not rush to open the box, check whether the motor packaging is complete, whether there is moisture and other phenomena; After opening the box, we need to carefully clean the dust of the motor and the anti-rust layer of the shaft; Check the orderTorque motorWhether the data on the nameplate meets the requirements of the order; Check the appearance of the motor, whether the motor is knocked or damaged during transportation, whether the fasteners are loose and fall off, and try to rotate the rotor by hand to see whether it is flexible
(2).Erection workgeneralTorque motorAll are forced cooling by external fans, so the place where the motor is installed should ensure good ventilation and replacement, do not stick to the wall, and the distance from the wall board (wall) is not less than30cm;Electric machineThe connection box is marked with a ground bolt and must be properly secured according to the mark.
Mori machineDimensions installation table:
Above isMori machineSmall series for everyone to sort out some aboutTorque motorAfter receiving the inspection and installation work, if you are interested in understanding our products, you can consult online message, or call directly0575-8378-1127.