Torque motorThe trial run is actually a process of checking work and mutual understanding between people and the motor, when the motor is working, it may encounter problems such as too low speed or insufficient torque, so the "trial run" is still necessary, belowMori machineSmall series is a brief introduction Torque motorProblems we should check or pay attention to during the test run:

       1). Electric machineCheck the rotation direction, the rotation direction is consistent with the mechanical requirements of the drag, if it is found that the direction is inconsistent, then the power supply should be cut off immediately, and the replacement of any two power lines can correct this phenomenon.

       2).First startMoment of forceElectric machineWhen the speed is a certain value, the tachometer is used to check whether the value is consistent with or close to the following table, and it is necessary to observe whether the various mechanical connection parts are loose or a series of phenomena of rubbing, and make necessary adjustments and repairs.

       3) letElectric machineContinue in idle state1-2Hour, it is necessary to pay attention to the occurrence of abnormal sound, and check whether the bearing has oil leakage or heat phenomenon, only in the idling state without abnormal, can be carried out load test run.

       4) in progressElectric machineWhen the load is in trial operation, if the motor speed is too large or the torque is too high, the voltage can be adjusted down to the appropriate value (reduce); During the load test run, if the motor speed is too low or the torque is not enough, the voltage can be adjusted upward to the appropriate value (boost voltage), if the problem is still not solved after adjustment, such as selectionTorque motorThe speed is too low, which causes the motor temperature rise to exceed the specified value, then it should be considered whether the speed ratio of the reducer is appropriate, or whether the number of poles selected by the motor is appropriate.
       The above is about Torque motorTrial operation of the content, if you are interested or want to know our products, you can consult online message or directly call:0575-8378-1127.