Moisture is a fatal factor in the use of motor products, such as splashing rain or moisture generated by condensation can invade, especially during the stop of operation, then inTorque motorWhen the motor is stopped or stored for a long time, how should we avoid moisture, and what should we do after moisture? Here is a simple understanding with Senli Motor Xiaobian.

       when Torque motorWhen it is stopped for a long time or stored, it is necessary to regularly measure the corresponding or interphase insulation resistance with the insulation meter, and make a comparison with the original test value, so as to facilitate the timely discovery of the insulation defect of the motor. Do not turn off the heating switch at will in a motor equipped with electric heating unless special circumstances.

       Pay special attention during wet weather, such as the rainy season or winter Torque motorWaterproof, moisture-proof, drying. Special attention should be paid to the motors used in open wet places, and the motors that are seriously damp or splashed with water need to be carefully checked in use. If it is found that the motor is soaked in water, it is necessary to disassemble the motor and draw out the rotor inside, dry it with compressed air, and then bake it with a baking lamp on the inner ends of the torque motor stator, test the motor insulation value, and the insulation resistance should not be lower than5Megohm, after testing not lower than this value of the torque motor can be used.
       The above is about how to deal with the moisture of the torque motor, Shengzhou Mori machine19Focus on the production and development of motor, the main products: three-phase asynchronous motor, DC motor, torque motor, brake motor, single-phase motor and other series; From the raw materials to achieve independent production, the source to ensure quality. If you are interested in learning about our products or have questions about it, you can consult online or call us directly:0575-8378-1127。我们将会在第一时间给您答复。