The dipping process can be said to beTorque motorIt is a very critical step in the manufacturing process, and it must be soaked "through" when it is dipped in order to prevent short circuit and breakdown of insulation damage caused by vibration friction of the coil in the slot.

        Right againstTorque motorWhen the stator winding is immersed in paint, the practice of painting only at the end is not desirable, which belongs to hiding the ears and stealing the bell; The first thing to be done is to "penetrate", otherwise it can not prevent the vibration friction of the coil in the slot, and it is easy to cause short circuit between coil turns.

       Because of eachTorque motor manufacturersThe manufacturing process is different from its equipment, some surfaces will deposit a thick layer of paint, some will look very thin, but only the winding gap is filled with paint enough dense stator windings, assembledTorque motorTo be considered a good product.

       Senli motor products all use vacuum dipping process, and want to make the dipping paint "permeable" it is necessary to use such equipment to improve the heat resistance and heat dissipation of the winding, but also enhance the mechanical properties and chemical stability of the winding insulation. The purpose of vacuum dipping is to fully solidify the coil, strengthen the insulation strength and improve the mechanical strength of the winding.

       Mori machineIs a family with19Years of R&D and production experienceTorque motor manufacturersThe vacuum dipping equipment is also used180°Grade high temperature resistant all copper wire. Products can be customized according to demand, to provide more than one service, if you are interested in our products welcome to leave a message online consultation or call directly:0575-8378-1127.