Shengzhou Senli motor from the source to ensure quality. From the shell, shaft, rotor, stator are independently produced, the production process is strictly in accordance with the quality system management. isTorque motor manufacturerThe production of products can be achieved in the short and long term30Minutes of blocked rotation time.
Gridlock torque and static torque refer to the torque when the speed of mechanical equipment is zero (gridlock). howeverTorque motorTorque can be generated when the torque is blocked, so the torque is also divided into peak torque and continuous torque.
Torque motorThe main feature is that it has soft mechanical characteristics and can achieve blocked rotation. When the load torque increases, the speed can be automatically reduced and the output torque can be increased. When the load torque is a certain value, the motor end voltage must be changed to speed regulation. However, it should be noted that the speed adjustment rate of the torque motor is not good.
When we areTorque motorWhen the load is increased on the operating machine, the speed is automatically reduced, but the output torque is increased to ensure that it is balanced with the load. It has high locked-rotor moment and small locked-rotor current, and can withstand the locked-rotor operation within a period of time. However, because the rotor resistance of the torque motor is relatively high, the loss is also very large, so the heat generated will be very large, especially in some low-speed operation and rotation blockage. As a result,Torque motor manufacturerA separate axial flow or centrifugal fan is installed on the rear cover for forced cooling.
Mori machineProduction of motors to meet customer needs. Is a family with19Years of R&D and production experienceTorque motor manufacturerThe production of this product meets the application of receiving and unwinding production; adopt180°Grade high temperature resistance all copper wire, durable; We can customize products according to needs, while also realizing short or long term (30Minutes) of the rotation time. Interested in our products welcome online message consultation or call directly:0575-8378-1127.