Single-phase asynchronous motor with load normal operation of uniform speed, moderate sound, appropriate heating. However, it is necessary to often pay attention to the temperature rise of the motor, if serious fever and other adverse symptoms are found, it is necessary to shut down the operation. Below, we will understand the maintenance work of single-phase asynchronous motors when they are used together with Senli Motor Xiaobian.

       The above situation is mostly in rural areas due to the reduction of power grid voltage, although this heat will not burn the winding for a while, but to reduce the service life of the motor. It is necessary to ensure that the motor is moisture-proof and well-ventilated, and the outlet box and capacitor can not be flooded, nor can there be mechanical damage. The wind shelter of the hood can not be blocked, and the motor shell should be well grounded. When the capacitor is damaged and renewed, the voltage value of the new capacitor shall not be lower than the voltage value of the old capacitor, and the number of practices is equal.

       When the motor runs for a considerable period of time can be disassembled for maintenance. Clean up internal debris dust, fill lubricating oil, etc.; with500Voltmeter measuring winding insulation resistance, normal should not be less than0.5Teraohm.

       We are onSingle-phase asynchronous motorWhen disassembling, pay attention to:

       ①The internal wiring of the winding, welding points of the centrifugal switch, etc., shall not be mistaken or disconnected

       ②Do not break the winding insulation, protect the operation gap of the centrifugal switch, and ensure the normal operation of its contacts. When the contacts have spark burning spots, they can be lightly polished with a fine rag

       ③The aluminum motor should pay attention to avoid heavy hits, protect the end end of the motor, do not damage the heat dissipating ribs on the shell and end cover, in order to maintain good heat dissipation conditions. The fan blade should not be bent or broken, and the bearing and shaft should not have mechanical damage. When the motor is stored, it should be placed in a ventilated and dry place.

       Single-phase asynchronous motor manufacturers, Senli Motor,19Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.