Due to the different technological level and raw materials used by single-phase asynchronous motor manufacturers, the same type of motor, some speed is higher and some are lower when working fully; In addition, when the motor is overloaded for a short time, some speed decreases more and some less. And the parameters are different,Shengzhou Senli MotorSupport on-demand customization.

       1.Speed: Generally speaking, the performance of high speed motor is better than that of low speed motor, so try to choose2very2800turn／Variable speed motor.

       2.Noise and vibration; The quality of the motor can also be roughly judged according to the noise size. The noise from the motor is small and not sharp. The motor with large noise is not bad bearing or poor motor performance, or the winding has local failure.

       3.The motor vibration is serious, first analyze whether it is caused by different hearts with the machine, otherwise the motor itself is seriously vibrating, which is a motor quality problem or failure, and the motor life is very low.

       4.Supporting: Select its own supporting motor, first pay attention to the speed should be appropriate, followed by the starting capacity (full load, light load, no-load) to meet the requirements, and then the selected power must be appropriate. Considering the safe operation, the motor power should be larger than the adapted equipment, so as to avoid accidental overload and heating of the motor. But not too large, otherwise it will cause waste and uneconomy.

       5.Heat: The general motor will heat up during normal operation, which is allowed. Micro-motor temperature rise according to national regulations65.C(EGrade insulation), that is, the feel temperature of the motor is relatively high during normal operation. In general, the hand motor can be put down, and it can not be retracted in a hot hand, of course, the temperature is lower and the quality of the motor is good.

       Single-phase asynchronous motor manufacturers, Senli Motor,19Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.