We commonly use electromagnetic brake as an additional device on the brake motor; In form, there are two kinds of power-on braking and power-off braking. Power-on braking can be quickly positioned and accurately positioned, but the application has certain limitations; Power-off braking is easy to control and fast braking speed. Power-off braking means that the equipment can brake safely when the power failure is out of control, ensuring the safety of people and facilities.

       When we used it for a whileBrake motorAfter, it is also necessary to maintain the brake, such as checking whether the friction parts are worn, you can adjust the clearance value by adjusting the screws, nuts, adjusting sleeves, etc., so that it meets the specified value; The friction surface should also be kept clean and free of impurities.

       During installation, it should be noted that the brake and the motor share the power supply, and it is necessary to ensure that the motor and the brake can be powered and lost at the same time. Only at the rated voltage can lose power and release the brake control, once the voltage is low, the motor can not start, the motor will be burned; Therefore, the motor installed with the brake must ensure that it starts at full pressure.

       For the short circuit test of the motor, due to the low pressure (e.g380VtheThree-phase asynchronous motorA surname Pressure is generally100V), can meet the static state requirements of the motor without plugging.

       Senli Motor,20Focus on the development and production of electric motors. Available if needed1688Search factory name "Shengzhou Chaoli Electric Appliance Factory" , Or online consultation message, we will have business personnel to get in touch with you, you can also contact us directly0575-8378-1127.