Shengzhou Senli Motor focus on the production of motor research and development, in the raw materials to achieve independent production, from the source to ensure quality. The above is about the torque motor content, if you want to know more about the torque motor content, or interested in learning about our products, welcome to leave a message online consultation or call directly: 0575-8378-1127.

"Senli Motor" brand belongs to Shengzhou super power electric Appliance Factory, the company's main products: three-phase asynchronous motor, torque motor, brake motor, single-phase asynchronous motor, DC brushless motor, etc., has passed the EU CE certification, 3CE certification and third party quality testing.

Torque motor is a common representative of three-phase asynchronous motor. In the process of our use, if the operation is improper, it is easy to affect the normal operation of the equipment, then what do we need to pay attention to when using the torque motor? In order to ensure that the mechanical properties of the motor are intact, we need to pay attention to these six points when using: 1, the torque motor should pay attention to adjusting the speed of the motor according to the size of the voltage during use, so as to avoid the motor because the load is too small, the voltage environment temperature is too high, and the operation of the equipment is damaged.

In the use of production equipment, how to make the motor reduce energy consumption and save electric energy in the production operation to increase the benefit, it has been pursued. Senli Motor has rich technical experience and service accumulation, and integrates the concept of environmental protection and energy saving with the design. The method of realizing energy saving of three-phase asynchronous motor in production operation is described:

Senli Motor is a torque motor manufacturer, independent research and development production, the production of the motor to meet the needs of this mechanical characteristics, reasonable structural design, high efficiency, good characteristics, long life, good versatility and other advantages; When selecting the right motor, depending on the selected specifications, in order to obtain good winding characteristics, the speed of the torque motor should work within a certain range.

The characteristics of the torque motor must be understood, which can keep the tension unchanged, and will not cause the uneven thickness of the wound product; Therefore, manufacturers that need to be applied to this aspect will choose a torque motor with soft characteristics as the working power in the production process; So the motor models are different. When we choose, how should we inform the torque motor manufacturer of the products we need?

The composition of the three-phase asynchronous motor is inseparable from some small parts, and the service life can not be affected and determined by a single factor. In our actual use process, the influencing factors are complex and diverse; Learn about the factors that affect the service life of three-phase asynchronous motors:

The torque motor structure is doughnut-shaped. It is divided into an outer rotor motor with the rotor in the outer ring and the stator in the inner ring. And the stator in the outer ring, the rotor in the inner ring of the inner rotor motor. Because the external rotor can produce a larger torque under the same size, the external rotor motor is more commonly used. Some torque motors can only work within a specific Angle range and cannot rotate a circle, which is called a limited Angle or swing motor. There are also linear motors that consider introducing characteristics similar to those of torque motors into linear motors.

Look: We judge whether the motor is burned out, the direct method to see whether the front bearing end cover of the three-phase asynchronous motor is black; In general, because the bearing is broken, the intense friction will make the bearing oil seal temperature rise too high and turn black; When the bearing falls apart, it causes the sweep to short-circuit the coil and trip. Smell: three-phase asynchronous motor overload or sweeping will cause the coil to burn, then we open the junction box will smell the burnt smell after the coil burns.

In the last post we learned five things about Three-phase asynchronous motor不转的原因，在这再次强调电机如果发生故障务必请技术人员处理维修，严谨非技术人员私自拆卸，以免引起不必要的损失。