The surface paint is the paint applied to the surface of the product by the torque motor manufacturer, which can beautify the surface; Of course, this is not only the beautification effect, but also the role of anti-corrosion and anti-oxidation, to meet the torque motor is the operating environment, to ensure that the motor performance does not deteriorate.

Today, Senli Motor Xiaobian will share with you the maintenance method of three-phase squirrel cage induction motor. If you want to extend the service life of three-phase asynchronous motors, torque motors and other products, it is necessary to do a good job of maintenance work, and daily maintenance work is also very important.

Shengzhou Senli Motor, for three-phase asynchronous motor, torque motor and other products will be tested, and full inspection factory; Only qualified motor products will leave the factory, and provide quality inspection reports. Today, Senli Motor Xiaobian will share with you the "running-in period" of the motor.

Some equipment manufacturers will repair the DC motor directly applied to the equipment, this practice is not right; For the motor after maintenance, we need to carry out some test work to check whether the machinery can be used normally. And there is no overheating, abnormal sound, vibration and other phenomena, following the Senli motor Xiaobian together to understand it.

Hebei torque motor wholesale choose Senli, Senli motor 19 years focus on the research and development and production of plastic mechanical torque motor, supply 3KW and below small power motor products, the production of torque motor products, to meet the characteristics of low speed high torque, with soft mechanical characteristics, can achieve short-term gridlock, load torque increase, speed automatically decrease, while increasing the output torque.

Do you know that when the three-phase asynchronous motor is running, the parts will affect the temperature rise. The stator winding and rotor are two heat sources, and the heat is radiated and conducted through the surrounding medium, which is the heat transfer medium. In the three-phase asynchronous motor, torque motor and other products, winding stator core, end cap, bearing system, fan and wind hood together constitute the heat exchange system of the motor.

Motor winding is a key part of the production, for the inspection of torque motor winding, one side is to check the appearance, the other side is to check the electrical quality, only these two correct motor manufacturers will carry out the whole machine assembly. Another important process of the winding is dipping, the inspection before assembly is carried out after the winding is finished wiring and before dipping; Torque motor manufacturers are used to calling it an electrical semi-finished product test, for the inspection of electrical performance, different manufacturers have different methods, such as Senli uses a comprehensive tester, and some use low voltage to measure current.

Thermal overload relay is a more common and more economical one, overload protection device. Especially for the single-phase asynchronous motor, the bimetal sheet is the working component of the overload relay of the thermal motor. Today, Senli Motor Xiaobian will take you to understand the topic of thermal protection.

Shengzhou Senli Motor, 19 years focus on torque motor research and development and production, the main production products include: DC, torque, three-phase asynchronous, brake motor and other products. Today, Senli Xiaobian will take you to understand the reasons for the brake motor fever.

Star start and triangle start are the wiring methods of three-phase asynchronous motors, and the wiring methods used in different scenarios are different, so today, Senli Motor Xiaobian will take you to understand the differences and characteristics of these two wiring methods.