Do daily maintenance, is an important measure to ensure the stable operation of the motor, torque motor manufacturers remind you to avoid the motor burned motor temperature check is very important, like the quality of the starting equipment directly determines whether the motor can start normally, the following Senli motor Xiaobian will take you to understand how to avoid the motor burned.

In the last part, we talked about keeping the surrounding environment of the motor clean, which is an important condition to ensure that the motor can run stably; However, if it is not working at the rated current during operation, whether it is a three-phase asynchronous motor or a torque motor, it will lead to overload, which is easy to cause the motor to burn.

To do the daily maintenance of the motor, in order to ensure the temperature operation of the motor, such as three-phase asynchronous motors, torque motors and other products. If it is too late to carry out maintenance until the problem appears, today Senli Motor Xiaobian will take you to understand how to avoid the motor being burned.

Previously talked about the motor parts wear, line aging, screw loosening off, etc., is a common cause of shortened life, torque motor manufacturers remind some sudden failure, or some external factors will cause the service life of the motor to shorten, the following and Senli motor Xiaobao together to see it.

When the motor is out of phase, there are many reasons, such as wiring methods, load, current, these factors are different, so we also need to take different protective measures to protect, torque motor manufacturers remind us that we can do daily maintenance records in the daily production and use process, which can reduce the occurrence of failures.

Many motor overheating is caused by poor ventilation and heat dissipation, some textile industry, often use torque motor, and the raw materials in the cotton wool is easy to cause the blockage of the ventilation channel, when the use of time increases, the degree of blockage will become more and more serious, then the heat dissipation will become worse and worse, resulting in a rise in temperature, over the allowable value will cause the motor to burn.

In the production of torque motors to ensure a clean and ventilated environment, naturally stored in the warehouse is the same; It is better to maintain the temperature in the warehouse at 5 ° C ~ 35 ° C, and the humidity can not be too high, otherwise it is easy to cause the motor to be damp, so that the insulation resistance is reduced, the following Senli motor Xiaobian will simply talk about how to keep the motor.

Humidity can be said to be a fatal factor in the use of the motor, the moisture of the three-phase asynchronous motor will lead to the reduction of the effect of the insulation material, and even lead to leakage or short circuit phenomenon, today, the Senli motor editor will take you together to understand how to deal with the moisture.

The YS series three-phase asynchronous motor products produced by Shengzhou Senli Motor are designed according to three-phase voltage 380V, frequency 50HZ, IP44, B-class insulation continuous work, and the frame number is common with the national standard; The range of applications is still very wide, but many manufacturers are directly installed after receiving the goods, and feel that they can drive the mechanical equipment to run, in fact, because of the appearance of the goods to do a check.

As a more torque motor used in winding operations, it has better soft mechanical characteristics, can achieve short-time lock-up, low speed, large torque has become a major feature of it, and maintenance is more convenient; Therefore, it is widely used in major industries, such as plastics, textiles, etc. Today, Senli Motor Xiaobian shares the inspection work done before the torque motor is started.