In the process of using three-phase asynchronous motors, we have encountered how many motor burns, motor "strike" the entire production will lag behind, so today Senli Motor Xiaobian and you talk about how to avoid motor burns.

The use of torque motor is very wide, in the winding operation can be applied to metal materials, fibers, paper, plastics, rubber, etc., this process is usually a process in the tail of the production, can be said to be very important. In this process, it is necessary to maintain the tightening of the winding product and maintain a uniform tension, just so that this requirement can be met.

In the production, only when the mechanical equipment will not rotate, it is found that the motor has a problem, which is also a problem for many manufacturers, which will greatly reduce the production efficiency, so today, Senli Motor Xiabian will take you to understand some inspection items that need to be done when the three-phase asynchronous motor is in operation.

In the production process of some industries, the product needs to be wound on the drum, a problem that needs to be solved here is how to make its diameter from the beginning to the gradual increase of the whole process, keep the change of tension and linear speed within the allowable range? YLJ series torque motors have such electrical characteristics.

The motor is mainly composed of magnetic conductive material - silicon steel sheet, coil winding - copper wire and frame shell. The working principle is the law of electromagnetic induction, and the motor is to convert electrical energy into mechanical energy. The following and Senli motor Xiaobian together to discuss the requirements for the purchase of three-phase asynchronous motors.

Torque motor can be divided into winding type and roll type. When winding type is blocked, the moment is the peak moment and the current is the peak current. Because the torque almost does not change (or is very small) when the speed changes, the torque is still its rated torque when it is blocked.

As a torque motor manufacturer with 19 years of research and development and production experience, what is the shipping process of Senli electric? Today, Senli Motor Xiaobian will take you into our delivery site to find out.

When we use three-phase asynchronous motors, if the load of the drag exceeds the rated capacity, the motor will be overloaded, and some abnormal phenomena will occur. How to judge overload? What kind of phenomena will be produced? Shengzhou Senli motor with you to discuss the next.

Three-phase asynchronous motor is a kind of equipment that converts electrical energy into mechanical energy. When the stator winding passes through the three-phase current, the rotating magnetic field will be generated in the rotor winding, the induced electromotive force will be generated in the rotor winding of the closed loop, the rotor current and the magnetic field will interact to produce electromagnetic torque, so that the rotor drives the mechanical load to rotate.

Torque motor has the characteristics of large torque, low speed, is according to the production requirements of an asynchronous motor; Because in some cases, it is required to be able to maintain a period of time or run in a long-term state of blocked rotation. The more common question asked about this motor is: Why does the motor not burn out when it is blocked for such a long time?