When we choose products, there must be a lot of product information to understand, such as when we choose torque motor products, we need to know some relevant knowledge points of this product, only by mastering these, can we buy cost-effective products. Here is a simple understanding with Senli Motor Xiaobian.

Brake motor, belongs to an extended series of three-phase asynchronous motor, it is through its tail of an electromagnetic brake, in the energized state, when the motor can operate normally; When the power is off, the holding brake is opened, and the braking effect is achieved under the action of the spring.

When the motor rotates, the rotor collides with the inner circle of the stator, which is called motor sweep; When the three-phase asynchronous motor produces this phenomenon, the outer surface of the rotor and the inner circle of the stator will appear scratches, which indicates that the rotor and stator gaps are uneven. Here is a simple understanding with Senli Motor Xiaobian.

Three-phase asynchronous motor is a common product, in a certain range, can automatically adjust the load torque (torque) and speed of the relationship; Therefore, it is often used for transmission occasions, Senli is a manufacturer focusing on the production of 3KW and below small power motors, and can carry out diversified customized services according to the actual needs of customers.

Winding coating is a very important process in the production process of motor products. Torque motor manufacturers improve the heat resistance and thermal conductivity of winding insulation through the coating process. Before the winding is not dipped in paint, there is a lot of air in the gap, and the thermal conductivity is very poor, so the winding is dipped in paint not only for insulation, but also to fill all the gaps of the winding insulation and increase the thermal conductivity.

The working system of the motor is a series of load conditions that the motor is subjected to, including starting, no-load, stopping and breaking energy and their duration and sequence. No-load means that the three-phase asynchronous motor is in a rotating state with zero power output. Full load refers to the state of operation at its quota. Shutdown and disconnection refers to the state in which there is neither motion nor electrical or mechanical energy input.

In the actual production process, some long lead three-phase asynchronous motors, the vast majority of the ground wire is provided by the manufacturer; Grounding is a very critical safety protection measure in motor products. Here is a simple understanding of the problem of motor grounding with Senli Motor Xiaobian.

The rotor speed of the three-phase asynchronous motor is lower than that of the rotating magnetic field, and the rotor winding is induced by the relative motion between the magnetic field and the electromotive force and current, and the electromagnetic torque is generated by the interaction with the magnetic field to achieve energy conversion. Here is a simple understanding with Senli Motor Xiaobian.

YLJ torque motor is a product that provides winding and winding torque, which can maintain the tension balance of the rolled item, and can continue to operate at low speeds or even when the rotor cannot rotate; 19 years focus on 3KW and below small power motor manufacturer - Senli motor, we produce YLJ series three-phase torque motor, beautiful appearance, compact structure, light weight, good heat dissipation performance.

Senli Motor, is a focus on 3KW and below small power motor production manufacturers, the main production products include three-phase asynchronous motor, torque motor, DC motor, brake motor, etc. When we select the motor, we need to make a reasonable selection according to the load nature and the production process.